Network Connectivity
60
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
Raw TCP/IP Printing
Raw TCP/IP is used to open a TCP socket-level connection over Port 9100, and stream a print-ready file
to the printer input buffer. It then closes the connection either after sensing an End Of Job character in
the PDL or after expiration of a preset timeout value. Port 9100 does not require an LPR request from the
computer or the use of an LPD running on the printer. Raw TCP/IP printing is selected in Windows as the
Standard TCP/IP port.
Configuring Raw TCP/IP Settings
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties
>
Connectivity
>
Setup
.
2.
For Protocol, next to Raw TCP/IP Printing, click
Edit
.
3.
On the Raw TCP/IP Printing tab, for Protocol, select
Enabled
.
4.
For TCP Port Number, ensure that Port 1 is set to
9100
.
Note:
To emulate HP JetDirect EX Plus 3, set Port 2 to
9101
and Port 3 to
9102
.
5.
Next to Bidirectional, for each active port, select
Enabled
.
6.
Next to Maximum Connections per Port, for each active port, type a number from 1 through 32.
7.
Next to For End of Job Timeout, for each active port, type a time in seconds from 0 through 1800.
8.
Next to PDL Switching, for each active port, select
Enabled
as needed.
Note:
PDL Switching allows the printer to switch automatically between multiple supported PDLs
within a single job.
9.
To save the new settings, click
Apply
.
10.
To return all settings to the default status, click
Default All
.