Xerox WorkCentre 7800 series Administrator'S Manual Download Page 150

Page: 150 / 284

Printing

150

Xerox

WorkCentre

7800/7800i Series Color Multifunction Printer

System Administrator Guide

UNIX, Linux, and AS/400 Printing

UNIX-based printing uses LPD/LPR port 515 or lp to port 9100 to provide printer spooling and network

print server functionality. Xerox

printers can communicate using either protocol.

Xerox

Printer Manager

Xerox

Printer Manager is an application that allows you to manage and print to multiple printers in

UNIX and Linux environments.

Xerox

Printer Manager allows you to:

•

Configure and check the status of network connected printers.

•

Set up a printer on your network as well as monitor the operation of the printer once installed.

•

Perform maintenance checks and view supplies status at any time.

•

Provide a common look and feel across the many different suppliers of UNIX and Linux operating

systems.

Installing Xerox

Printer Manager

Before you begin:

Ensure that you have root or superuser privileges to install Xerox

Printer Manager.

Download the appropriate package for your operating system. To locate drivers for your printer, see

www.xerox.com/office/drivers

. The available files are:

−

Xeroxv5Pkg-AIXpowerpc-x.xx.xxx.xxxx.rpm for the IBM PowerPC family.

−

Xeroxv5Pkg-HPUXia64-x.xx.xxx.xxxx.depot.gz to support HP Itanium workstations.

−

Xeroxv5Pkg-Linuxi686-x.xx.xxx.xxxx.rpm to support RPM-based 32-bit Linux environments.

−

Xeroxv5Pkg-Linuxi686-x.xx.xxx.xxxx.deb to support Debian-based 32-bit Linux environments.

−

Xeroxv5Pkg-Linuxx86_64-x.xx.xxx.xxxx.rpm to support RPM-based 64-bit Linux environments.

−

Xeroxv5Pkg-Linuxx86_64-x.xx.xxx.xxxx.deb to support Debian-based 64-bit Linux environments.

−

Xeroxv5Pkg-SunOSi386-x.xx.xxx.xxxx.pkg.gz for Sun Solaris x86 systems.

−

Xeroxv5Pkg-SunOSsparc-x.xx.xxx.xxxx.pkg.gz for Sun Solaris SPARC systems.

To install the custom driver, log in as root then type the following command:

−

AIX:

rpm -U Xeroxv5Pkg-AIXpowerpc-x.xx.xxx.xxxx.rpm

−

HPUX:

swinstall -s Xeroxv5Pkg-HPUXia64-x.xx.xxx.xxxx.depot.gz \*

−

Linux (RPM based):

rpm -U Xeroxv5Pkg-Linuxi686-x.xx.xxx.xxxx.rpm

−

Linux (Debian based):

dpkg -i Xeroxv5Pkg-Linuxi686-x.xx.xxx.xxxx.deb

−

Solaris (x86 based):

pkgadd -d Xeroxv5Pkg-SunOSi386-x.xx.xxx.xxxx.pkg

−

Solaris (SPARC based):

pkgadd -d Xeroxv5Pkg-SunOSsparc-x.xx.xxx.xxxx.pkg

The installation creates a Xerox directory in /opt/Xerox/prtsys.

Summary of Contents for WorkCentre 7800 series





























































































































































































































































































Search results

Summary of Contents for WorkCentre 7800 series

Reviews:

Related manuals for WorkCentre 7800 series

Brands by name

Popular brands

Xerox WorkCentre 7800 series, Administrator'S Manual

Search results

Summary of Contents for WorkCentre 7800 series

Reviews:

Related manuals for WorkCentre 7800 series

Brands by name

Popular brands