Initial Setup
22
Xerox
®
WorkCentre
®
7800/7800i Series Color Multifunction Printer
System Administrator Guide
Initial Setup at the Control Panel
Installation Wizard
The Installation wizard starts the first time you turn on the printer. The wizard prompts you with a series
of questions to help you configure basic printer settings.
Note:
You can complete the wizard at any time.
•
To assign a static IP address or change the default dynamic addressing settings, use the IP Address
Settings wizard.
•
To add phone numbers for support or supplies contacts, use the Contact Numbers wizard.
•
To configure basic embedded fax settings, use the Fax Setup wizard.
Using Installation Wizards
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Device Settings
>
Additional Install Options
.
3.
To start a wizard, touch
IP Address Settings
,
Contact Numbers
, or
Fax Setup
.
4.
Follow the onscreen instructions.
Setting the Measurement Units
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Device Settings
>
General
>
Measurements
.
3.
To show dimensions in metric or imperial units, under Units, select an option.
4.
To specify the decimal mark symbol that the printer uses, under Numeric Separator, select
Comma
or
Period
.
5.
Click
OK
.
