Xerox WorkCentre 5687 Series, Service Manual, Page: 941 / 2320

August 2007
2-749
WorkCentre 5687 Family
OF4a
Status Indicator RAPs
10-530 The fuser module is not
compatible with this
machine. Please refer to
the user guide The system setting does not
match the fuser type setting
(service offering) Install new fuser mod-
ule or modify settings
10-531 - The system setting does not
match the fuser type setting
(fuser voltage) Install a new fuser or
modify settings
10-532 - The system setting does not
match the fuser OpCo ID set-
ting (Market region) Install a new fuser or
modify OpCo ID set-
ting
10-533 - The system setting does not
match the fuser product speed
setting Install a new fuser or
modify the product
speed setting
10-540 Please wait adjusting
fuser temperature Fuser temperature control fail-
ure. Perform 10-322, 10-
324, 10-325, 10-330,
10-370 RAP, 10-315,
10-320, 10-321, 10-
323, 10-340, 10-350,
10-360, 10-380 RAP
10-545 Fuser module under tem-
perature fault. Printing is
unavailable. If fault per-
sists, call for assistance.
Touch Ignore Error to use
other services Fuser warm-up failure. Perform 10-322, 10-
324, 10-325, 10-330,
10-370 RAP
10-550 Fuser module temperature
fault. Printing is unavail-
able. If fault persists, call
for assistance. Touch
Ignore Error to use other
services Hardware detected fuser fail-
ure. Perform 10-315, 10-
320, 10-321, 10-323,
10-340, 10-350, 10-
360, 10-380 RAP
10-555 Fuser module control fail-
ure. Printing is unavail-
able. If fault persists, call
for assistance. Touch
Ignore Error to use other
services Fuser control software failure. Perform 10-322, 10-
324, 10-325, 10-330,
10-370 RAP
10-570 Replace fuser module FRU CRUM authorization fail-
ure. Status active when fault
10-399 raised Perform 10-399 RAP
10-571 Clear the jam in Areas 3,4.
Close the front door when
the paper has been
removed Paper detected in inverter area
on power up or in standby Perform 10-132, 10-
133, 10-134 and 10-
107, 10-108, 10-109,
10-110
Table 10 10-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
10-572 Clear the jam in Areas 3,4.
Close the front door when
the paper has been
removed Paper detected near the
inverter sensor on power up or
in standby Perform 10-132, 10-
133, 10-134 and 10-
107, 10-108, 10-109,
10-110
Table 11 11-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
11-500 Ensure output module is
docked Output module un-docked in
standby. Dock the output mod-
ule. Perform 11-300-
110, 11-302-110, 11-
303-110 RAP for
LCSS, 11-300-130,
11-303-130, 11-304-
130, 11-305-130 RAP
and OF12 for HCSS,
11-300-171, 11-302-
171, 11-303-171 RAP
for HVF, 11-300-170,
11-303-170, 11-305-
170 RAP and OF12
for HCSS BM
11-501 Close the output module
top tray Output module entry gate
opened in standby Close the exit cover
11-502 Close output module top
cover Output module top cover
opened in standby Perform 11-300-110,
11-302-110, 11-303-
110 RAP for LCSS,
11-301-130, 11-302-
130 RAP for HCSS,
11-300-171, 11-302-
171, 11-303-171 RAP
for HVF, 11-301-170,
11-302-170 RAP for
HCSS BM
Table 10 10-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action