Xerox WorkCentre 5687 Series, Service Manual, Page: 2205 / 2320

August 2007
6-313
WorkCentre 5687 Family
dC330
General Procedures & Information
11-362 SH 1 Low Staples Snr LCSS and HCSS BM staple head 1
low staples sensor (Q11-362)
detects when staple cartridge is
almost empty
High = almost empty,
low = plentiful staples
11-363 SH 1 Cartridge Sen-
sor LCSS and HCSS BM staple head 1
cartridge present sensor (Q11-363)
detects when a staple cartridge is
installed High = cartridge
installed, low = cartridge
not installed
11-364 SH 1 Priming Sensor LCSS and HCSS BM staple head 1
priming sensor (Q11-364) detects
when the front two staples have
been pre-formed (primed) High = primed, low = not
primed
11-365 SU 1 Safety Gate
Switch LCSS stapling unit 1 safety gate
switch (S11-365) High = safety gate
closed
11-367 SU 1 Edge Reg Sen-
sor LCSS and HCSS BM staple unit 1
edge registration sensor (Q11-367)
detects the edge of the paper is
correctly registered High = paper present,
low = no paper
11-370 SU 1 Home Sensor LCSS and HCSS BM staple unit 1
home sensor (Q11-370) detects
when the staple head is at the cor-
ner staple position High = stapler home,
low = stapler not home
11-371 SU 1 Front Index Snr LCSS staple unit 1 front index sen-
sor (Q11-371) detects the index
position of the stapling head
High = at stapling posi-
tion, low = not at sta-
pling position
11-373 Offline Staple SW LCSS and HCSS BM offline staple
switch (S11-373) detects the opera-
tor command for offline stapling High = switch pressed,
low = switch not
pressed
11-374 Offline Staple LED LCSS and HCSS BM offline staple
LED, detects paper to be stapled High = paper present,
low = not detected
11-383 BM Guide Home Snr HVF and HCSS BM backstop guide
home sensor (Q11-383) detects
when the backstop is in the home
position High = home, low = not
home
11-384 BM Tamper1 Home
Snr HVF and HCSS BM tamper 1 home
sensor (Q11-384) detects when the
BM tampers are in the home posi-
tion High = home, low = not
home
11-386 BM Eject Sensor HCSS BM eject sensor (Q11-386)
detects booklets ejecting through
the crease rolls High = booklet present,
low = no booklet
11-389 BM Bin2 90% Full Snr HVF and HCSS BM bin 2 90% full
sensor (Q11-389) detects when bin
2 is 90% or more full
High = 90% or more full,
low = less than 90% full
11-391 BM Flapper Sector
Roll Home Sensor HVF and HCSS BM booklet maker
flapper sector roll home sensor
(Q11-391) High = home
Table 8 Input codes 11
Code Displayed Name Description General
11-392 PTU Switch HVF PTU switch (S11-392) detects
if pause to unload button is pressed High = made, low = not
detected
11-393 TriFold Front Dr Inter-
lock HVF tri fold door interlock (S11-
393) detects if the tri fold door is
closed High = closed, low =
door open
11-394 TriFold Top Cover
Interlock HVF tri fold top cover interlock
(S11-394) detects if the tri fold top
cover is closed High = closed, low =
cover open
11-409 BM Exit Sensor HVF BM exit sensor (Q11-409)
detects booklets exiting the booklet
maker High = detected, low =
not detected
11-411 BM SH1 Home Snr HVF BM and HCSS BM staple
head 1 home sensor (Q11-411)
detects when the staple head is
fully open (home position) High = home, low = not
home
11-412 BM SH1 Staples Low HVF BM and HCSS BM staple
head 1 staples low sensor (Q11-
412) detects when staple cartridge
is almost empty
High = almost empty,
low = plentiful staples
11-413 BM SH2 Home Snr HVF BM and HCSS BM staple
head 2 home sensor (Q11-413)
detects when the staple head is
fully open (home position) High = home, low = not
home
11--414 BMSH2 Staples Low HVF BM and HCSS BM staple
head 2 staples low sensor (Q11-
412) detects when staple cartridge
is almost empty High = almost empty,
low = plentiful staples
11-415 BM Crease Gate
Home HVF BM and HCSS BM crease roll
gate home sensor (Q11-415)
detects when the gate is fully raised High = gate raised, low
= gate not raised
11-416 BM Crease Blade
Home HVF BM and HCSS BM crease
blade home sensor (Q11-416)
detects when the crease blade is
fully retracted High = home, low = not
home
11-417 BM Crease Blade
Travel Lmt HCSS BM crease blade travel limit
sensor (Q11-417) detects when the
crease blade is fully extended High = limit made
11-418 BM Blade Mot
Encoder HVF BM and HCSS BM crease
blade motor encoder sensor (Q11-
418) generates motor speed pulses High = bar in encoder
wheel, low = gap in
encoder wheel
11-419 BM Crease Mot
Encode HVF BM and HCSS BM crease roll
motor encoder sensor (Q11-419)
generates motor speed pulses High = bar in encoder
wheel, low = gap in
encoder wheel
11-421 BM SH Carrier
Closed HVF BM and HCSS BM staple
head carrier closed sensor (Q11-
421) detects when the carrier is in
the closed position High = closed, low = not
closed
Table 8 Input codes 11
Code Displayed Name Description General