Xerox WorkCentre 5687 Series, Service Manual, Page: 938 / 2320

August 2007
2-746
WorkCentre 5687 Family
OF4a
Status Indicator RAPs
07-541 Tray 1 is out of service,
please use a different tray Tray 1 out of service. Perform 07F RAP
07-542 Tray 2 is out of service,
please use a different tray Tray 2 out of service. Perform 07F RAP
07-543 Tray 3 is out of service,
please use a different tray Tray 3 elevate top sensor does
not turn on within 7 seconds
after elevator motor on. Perform 07-355 RAP
07-544 Tray 4 is out of service,
please use a different tray Tray 4 elevate top sensor does
not turn on within 7 seconds
after elevator motor on Perform 07-360 RAP
07-546 Tray 5 is out of service,
please use a different tray Tray 5 cannot feed paper Switch the machine off
and on, GP 14. Check
that the tray is in the
correct position. Per-
form 07-306, 07-372, or
07-373 RAP
07-550 Tray 3 is lifting Tray 3 is lifting. Perform 07-355 RAP
07-560 Tray 4 is lifting Tray 4 is lifting Perform 07-360 RAP
07-561 Tray 5 is lifting, please
wait Tray 5 is currently lifting Perform 07-373
07-562 - Tray 5 is currently lowering Perform 07-374
07-563 Tray 5 is unavailable.
Check for obstructions in
Tray 5 Tray 5 lifting has stopped Perform 07-373
07-564 Tray 5 is unavailable.
Check for obstructions in
Tray 5 Tray 5 lowering has stopped Perform 07-374
07-571 Paper size mismatch.
Check paper in Tray 1.
Some image loss may
occur First sheet fed after a tray 1
status change does not match
the confirmed stock Check the paper in tray
1. Perform 07D RAP
07-572 Paper size mismatch.
Check paper in Tray 2.
Some image loss may
occur First sheet fed after a tray 2
status change does not match
the confirmed stock Check the paper in tray
2. Perform 07D RAP
07-573 Paper size mismatch.
Check paper in Tray 3.
Some image loss may
occur First sheet fed after a tray 3
status change does not match
the confirmed stock Check the paper in tray
3. Check that the tray is
set to correct paper
size, ADJ 7.1
07-574 Paper size mismatch.
Check paper in Tray 4.
Some image loss may
occur First sheet fed after a tray 4
status change does not match
the confirmed stock Check the paper in tray
4. Check that the tray is
set to correct paper
size, ADJ 7.1
Table 7 07-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
07-575 Paper size mismatch.
Check paper in Bypass
tray. Some image loss
may occur First sheet fed after a bypass
tray status change does not
match the confirmed stock Check the paper in
bypass tray and the
side guide is set cor-
rectly
07-576 Paper size mismatch.
Check paper in tray 5 The first sheet after a tray 5
status change does not match
the confirmed stock Confirm the paper size
in the UI
07-580 Reorder but do not
replace the Tray 5 Feed
Rolls Near the end of life - ensure
new stock is available Order new feed roll kit,
PL 8.45 Item 2
07-581 Slide Tray 5 up to
machine Tray 5 is un-docked Perform 07-372
07-590 <Replace tray 5 feed rolls
message> The feed head counter has
reached the end of life figure Install new tray 5 feed
rolls, PL 8.45 Item 2
Table 8 08-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
08-549 Clear jam from right hand
side of Tray 5 Sheet did not clear the wait
sensor within the expected
time Perform 08-115B, 08-
117B
08-550 Open left hand door Sheet over wait sensor Jam clearance. Per-
form 08-100A RAP
08-551 Open left hand door Tray 1 feed sensor detects
paper in feed area on power-
on or in standby, 08-101 Jam clearance. Per-
form 08-101 RAP
08-552 Open left hand door Tray 2 feed sensor detects
paper in feed area on power-
on or in standby. 08-102 Jam clearance. Per-
form 08-102 RAP
08-553 Open tray 3 Tray 3 feed sensor detects
paper in feed area on power-
on or in standby. 08-103 Jam clearance. Per-
form 08-103, 08-113
RAP
08-554 Open left hand door Tray 4 feed sensor detects
paper in feed area on power-
on or in standby. 08-104 Jam clearance. Per-
form 08-104, 08-114
RAP
08-555 Open front door Registration sensor detects
paper in registration area on
power-on or in standby. 08-150 Jam clearance. Per-
form 08-150A, 08-
151A RAP
08-556 Open front door Paper in duplex path at power-
on or in standby Jam clearance. Per-
form 08-160A, 08-
161A RAP
Table 7 07-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action