Xerox WorkCentre 5687 Series, Service Manual, Page: 2200 / 2320

August 2007
6-308
WorkCentre 5687 Family
dC330
General Procedures & Information
c. The status of the component is shown in the Status column i.e.:
i. On
ii. Off
iii. High
iv. Low
v. A numeric value with up to four digits e.g. 0020.
6. Touching a component in the component table and then touching Stop, stops that compo-
nent. To stop all components touch Stop All.
7. Touching Exit closes the Component Control window.
8. To exit diagnostics mode, GP 1, select the Call Close Out button.
Input Codes
Table 1 Input codes 01
Code Displayed Name Description General
01-300 Front Door Inter-
lock
Front door interlock switch (S01-
300) High = door closed, low =
door open
01-305 Left Door Interlock Left hand door interlock (S01-305) High = door closed, low =
door open
Table 2 Input codes 05
Code Displayed Name Description General
05-300 DADH closed
switch
DADH closed switch (S05-300) High = DADH lowered, low
= DADH raised
05-305 DADH cover inter-
lock
Top cover interlock switch (S05-
305). High = cover closed, low =
cover open
05-310 DADH doc present
sensor
Document present sensor (Q05-
310). High = document present,
low = no document
05-315 DADH length sen-
sor 1
DADH length sensor 1 (Q05-315). High = document present,
low = no document
05-320 DADH length sen-
sor 2
DADH length sensor 2 (Q05-320). High = document present,
low = no document
05-325 DADH width sensor Document width sensor (Q05-325). Analogue output, refer to
dC502
05-330 DADH feed sensor Feed sensor (Q05-330). High = document present,
low = no document
05-335 DADH takeaway
sensor
Takeaway sensor (Q05-335). High = document present,
low = no document
05-340 DADH reg sensor Registration sensor (Q05-340). High = document present,
low = no document
05-345 DADH exit sensor Exit sensor Q05-345). High = document present,
low = no document
05-350 DADH CVT sensor CVT sensor (Q05-350). High = document present,
low = no document
Table 3 Input codes 06
Code Displayed Name Description General
06-320 ROS Motor Ready
Snr
Detects when ROS motor is at
required speed. High = motor ready. Toggle
ROS motor (06-020) on
and off to check sensor.
06-340 ROS Ready Indicates that the ROS laser has
reached it’s operating level and the
ROS motor is up to required speed. High = ready. Toggle ROS
motor (06-020) on and off
to check sensor. The ROS
laser level will only be set
once the ROS motor has
reached the required
speed.
Table 4 Input codes 07
Code Displayed Name Description General
07-301 T1 Home Switch Tray 1 home switch (S07-301) High = tray home, low =
tray not home
07-302 T2 Home Switch Tray 2 home switch (S07-302) High = tray home, low =
tray not home
07-303 T3 Home Switch Tray 3 home switch (S07-303) High = tray home. low =
tray not home
07-304 T4 Home Switch Tray 4 home switch (S07-304) High = tray home, low =
tray not home
07-306 T5 Door Switch Tray 5 Door switch (S07-306) High = door closed, low
= door open
07-311 T1 Size Switch 1 Size switch 1 (S07-311) High = made
07-312 T1 Size Switch 2 Size switch 2 (S07-312) High = made
07-313 T1 Size Switch 3 Size switch 3 (S07-313) High = made
07-314 T1 Size Switch 4 Size switch 4 (S07-314) High = made
07-321 T2 Size Switch 1 Size switch 1 (S07-321) High = made
07-322 T2 Size Switch 2 Size switch 2 (S07-322) High = made
07-323 T2 Size Switch 3 auto size sensing (optional). High = made
07-324 T2 Size Switch 4 auto size sensing (optional). High = made
07-331 T1 Empty Sensor Tray 1 empty sensor (Q07-331) High = tray empty, low =
paper in tray
07-332 T2 Empty Sensor Tray 2 empty sensor (Q07-332) High = tray empty, low =
paper in tray
07-333 T3 Empty Sensor Tray 3 empty sensor (Q07-333) High = tray empty, low =
paper in tray
07-334 T4 Empty Sensor Tray 4 empty sensor (Q07-334) High = tray empty, low =
paper in tray
07-335 Bypass Empty Sensor Bypass empty sensor (Q07-335) High = tray empty, low =
paper in tray
07-336 T1 stack height Sensor Tray 1 stack height sensor (Q07-
336)
High = top of stack
sensed, low = top of
stack not sensed