Xerox WorkCentre 5687 Series, Service Manual, Page: 937 / 2320

August 2007
2-745
WorkCentre 5687 Family
OF4a
Status Indicator RAPs
05-589 Try turning the machine off
and on. Please call for
assistance if the problem
persists IOT, DADH or UI software ver-
sion supplied at power-on is
not compatible with the image
processor PWB Perform 03-300, 306,
461, 482, 805, 870
RAP, 03-320, 03-322 to
03-324 RAP, 03-310
RAP. If necessary,
reload the software, GP
4
Table 6 06-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
06-520 The ROS motor has fail-
ure. Switch the machine
off, wait 1 minute, then
switch on the machine
again. If the fault persists
call for assistance or
press Close to use other
services. ROS motor failed. Perform 06-020 RAP
06-530 ROS system failure. Print-
ing is unavailable. If fault
persists, call for assis-
tance. Touch Ignore Error
to use other services ROS system failed. Perform 06-340 RAP
06-540 ROS laser not being con-
trolled ROS laser not being con-
trolled. Perform 06-350 RAP
Table 7 07-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
07-501 Check the settings for
Tray 1 Tray 1 closed or size change
from power-on Confirm the attributes
or open the tray
07-502 Check the settings for
Tray 2 Tray 2 closed or size change
from power-on Confirm the attributes
or open the tray
07-505 Check settings for the
bypass tray Bypass tray size confirmation
required Confirm the attributes
07-506 Adjust position of Tray 1
before proceeding Tray 1 guides moved out of
‘fixed’ position Open tray 1 and reset
the paper guides
07-507 Adjust position of Tray 2
before proceeding Tray 2 guides moved out of
‘fixed’ position Open tray 2 and reset
the paper guides
Table 5 05-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action
07-511 Tray 1 empty, please
reload Tray 1 paper present sensor
detects no paper in tray Reload paper. If neces-
sary perform 07A RAP
07-512 Tray 2 empty, please
reload Tray 2 paper present sensor
detects no paper in tray Reload paper. If neces-
sary perform 07A RAP
07-513 Tray 3 empty, please
reload Tray 3 paper present sensor
detects no paper in tray Reload paper. If neces-
sary perform 07A RAP
07-514 Tray 4 empty, please
reload Tray 4 paper present sensor
detects no paper in tray Reload paper. If neces-
sary perform 07A RAP
07-515 Bypass Tray empty,
please reload Paper present sensor detects
no paper in bypass tray, while
attempting to feed from the
bypass Reload paper. If neces-
sary perform 07A RAP
07-516 Tray 5 empty, please
reload Tray empty sensor detects no
paper Reload paper. If neces-
sary, perform 07G
07-517 Inserter empty, please
reload Paper sensor detects no paper Reload paper.
07-521 Remove misfed sheet.
Close tray 1 IOT microprocessor detects
Tray 1 open Close tray. Perform 07-
301RAP
07-522 Remove misfed sheet.
Close tray 2 IOT microprocessor detects
Tray 2 open Close tray. Perform 07-
302 RAP
07-523 Remove misfed sheet.
Close tray 3 IOT microprocessor detects
Tray 3 open Close Tray. Perform 07-
303 RAP
07-524 Remove misfed sheet.
Close tray 4 IOT microprocessor detects
Tray 4 open Close Tray. Perform 07-
304 RAP
07-526 Close tray 5 door Tray 5 door has been detected
open Close the door, or per-
form 07-306
07-531 Tray 1 is low on paper Tray 1 paper low Perform 07A RAP
07-532 Tray 2 is low on paper Tray 2 paper low Perform 07A RAP
07-533 Tray 3 is low on paper Tray 3 paper low IOT microprocessor
detects Tray 3 paper
level at 25%. Perform
07B RAP
07-534 Tray 4 is low on paper Tray 4 paper low IOT microprocessor
detects Tray 4 paper
level at 25%. Perform
07B RAP
07-536 Tray 5 is low on paper Tray 5 paper below 5% full Add paper. If neces-
sary, perform 07-373
and 07-374 RAPs
07-539 Tray 5 is overloaded,
please remove excess
paper Paper equals or is more than
100% full in tray 5 Remove some paper. If
necessary, perform 07-
373 and 07-374
Table 7 07-5XX Status codes
Status
Code
UI Message Reason for Message Reference / Action