Xerox WorkCentre 5687 Series, Service Manual, Page: 2208 / 2320

August 2007
6-316
WorkCentre 5687 Family
dC330
General Procedures & Information
Table 17 Output codes 10
Code Displayed Name Description General
10-010 Fuser Web Motor Energizes the fuser web motor
(MOT10-010) On/off. 90 seconds timeout
10-030 Invert Mot Fwd
Slow
Energizes the inverter motor
(MOT10-030) forward at process
speed. On/off. 90 seconds timeout
10-035 Invert Mot Rev
Slow
Energizes the inverter motor
(MOT10-030) in reverse at pro-
cess speed. On/off. 90 seconds timeout
10-040 Invert Mot Rev Dup Energizes the inverter motor
(MOT10-030) in reverse at duplex
speed.
On/off. 90 seconds timeout
10-045 Inverter Path Sol Energizes the invert path solenoid
(SOL10-045). When de-energized
sheets are fed to the inverter On/off. 5 seconds timeout
10-050 Inverter Nip Sol Energizes the inverter nip solenoid
(SOL10-050). When de-energized
the nip is open On/off. 5 seconds timeout
10-055 Tri Roll Split Nip
Sol
Energizes the tri roll split nip sole-
noid (SOL10-055). When de-ener-
gized the nip is open On/off. 5 seconds timeout
10-065 Vac Transport Fan Energizes the vacuum transport
fan in the short paper path assem-
bly
On/off. 90 seconds timeout
Table 18 Output codes 11
Code Displayed Name Description General
11-000 Transport Motor 1 Energizes the LCSS transport Motor 1,
and HCSS BM and HVF transport motor
1A and Transport motor 1B (MOT11-000) On/off. 90 seconds
timeout
11-001 Transport Motor 2 Energizes the LCSS, HCSS BM and HVF
transport motor 2 (MOT11-001) On/off. 90 seconds
timeout
11-002 Diverter Solenoid Energizes the LCSS, HVF diverter gate
solenoid, HCSS BM and HVF BM upper
diverter solenoid (SOL11-002) On/off. 5 seconds
timeout
11-003 Tamp Mot Front
Home
Energizes the LCSS, HCSS BM and HVF
front tamper motor (MOT11-003) to the
home position. On/off. 5 seconds
timeout
11-004 Tamp Mot Rear
Home
Energizes the LCSS, HVF and HCSS BM
rear tamper motor (MOT11-004) to home
position On/off. 5 seconds
timeout
11-005 Tamp Mot Front
Move
Energizes the LCSS, HVF and HCSS BM
front tamper motor (MOT11-003) move
inbound. On/off. 5 seconds
timeout
11-006 Tamp Mot Rear
Move
Energizes the LCSS, HVF and HCSS BM
rear tamper motor (MOT11-004) move
inbound. On/off. 5 seconds
timeout
11-007 Tampers to A4LEF Moves the LCSS and HCSS BM tampers
to A4LEF position. On/off. 5 seconds
timeout
11-008 Tampers to
8.5x11LEF
Move the LCSS and HCSS BM tampers to
8.5”x11” LEF position. On/off. 5 seconds
timeout
11-009 Tamper Motor
Cycle
Cycles the LCSS tampers in and out until
time-out or stop. On/off. 90 seconds
timeout
11-010 CC Eject Roll Motor Energizes the HVF and HCSS BM com-
piler carriage eject roll motor (MOT11-010)
On/off. 90 seconds
timeout
11-011 CC Hold Solenoid Energizes the HCSS BM compiler carriage
tray hold solenoid (SOL11-011) On/off. 5 seconds
timeout
11-013 CC motor Step Up Energizes the HCSS ‘‘‘‘compiler carriage
elevator motor (MOT11-013) On/off. 5 seconds
timeout
11-014 CC Motor Move Up Energizes the HCSS compiler carriage
elevator motor (MOT11-013) to the upper
limit switch
On/off. 15 seconds
timeout
11-015 CC Motor Step
Down
Energizes the HCSS compiler carriage
elevator motor (MOT11-013) On/off. 5 seconds
timeout
11-016 CC Motor Move
Down
Energizes the HCSS compiler carriage
elevator motor (MOT11-013) to the lower
limit switch On/off. 15 seconds
timeout
11-020 Ejector Motor
Home
Energizes the LCSS, ejector motor
(MOT11-020) to the home position On/off. 5 seconds
timeout
11-021 Ejector Motor Move Energizes the LCSS, ejector motor
(MOT11-020) to the out position
On/off. 5 seconds
timeout
11-023 Ejector Motor Cycle Energizes the LCSS, HVF and HCSSBM
ejector motor (MOT11-020) cycle routine
until timeout or stop.
On/off. 90 seconds
timeout
11-024 Paddle Roll Motor
Home
Energizes the LCSS and HCSS BM pad-
dle roll motor (MOT11-024) to the home
position On/off. 15 seconds
timeout
11-025 Paddle Roll Motor
Run
Energizes the LCSS, HVF and HCSS BM
paddle roll motor (MOT11-025) until time-
out or stop On/off. 15 seconds
timeout
11-026 Paddle Roll Mot
Rev
Energizes the LCSS paddle roll motor
(MOT11-024) in reverse to actuate safety
gate. On/off. 15 seconds
timeout
11-027 Paddle Unit Motor Energizes the HVF paddle unit motor
(MOT11-027) to lift / lower paddle unit On/off. 90seconds
timeout
11-030 Bin 1 Elev. Mot
Home
Energizes the LCSS, HVF and HCSS BM
bin 1 elevate motor (MOT11-030) to the
home position. On/off. 15 seconds
timeout
11-031 Bin 1 Elev. Mot Up Energizes the LCSS, HVF and HCSS BM
bin 1 elevate motor (MOT11-030) by incre-
ments up On/off. 15 seconds
timeout
Table 18 Output codes 11
Code Displayed Name Description General