WARNING:
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
If you need additional safety information about the product or Xerox supplied materials, you can
email request to
.
O
Oppeerraattiioonnaall SSaaffeettyy
Your Xerox equipment and supplies were designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
Your attention to the following safety guidelines will help ensure the continued safe operation of your
Press:
• Do not remove any trays when the Press is printing.
• Do not open the doors when the Press is printing.
• Keep hands, hair, neckties, and so on, away from the exit and feed rollers.
• Covers, which require tools for removal, protect the hazard areas within the Press. Do not remove
the protective covers.
• Do not attempt to remove paper that is jammed deeply inside the Press. Switch off the Press
promptly and contact your local Xerox representative.
• To avoid a tip hazard, do not push or move the device with all of the paper trays extended.
• Do not place the Press in locations susceptible to vibrations.
• For optimum performance, use the Press at the
Altitude
specified in
Environmental Specifications
section of the User Documentation.
• Use the materials and supplies specifically designed for your Press. The use of unsuitable materials
may result in poor performance of the Press and possibly a hazardous situation.
• Follow all warnings and instructions that are marked on or supplied with the Press.
• Place the Press in a room that provides adequate space for ventilation and servicing.
• Place the Press on a level, solid surface, not on a thick pile carpet, that has adequate strength to
support the weight of the Press.
• Do not attempt to move the Press. A leveling device that was lowered when your Press was
installed may damage the carpet or floor.
• Do not set up the Press near a heat source.
• Do not set up the Press in direct sunlight.
• Do not store or operate the Press in an extremely hot, cold, or humid environment.
• Do not set up the Press in line with the cold air flow from an air conditioning system.
• Do not place containers of coffee or other liquid on the Press.
• Do not block or cover the slots and openings on the Press.
• Do not attempt to override any electrical or mechanical interlock devices.
Hot Warning:
Be careful when working in areas identified with this warning symbol. These
areas may be very hot and should not be touched.
8
