Xerox Versant 280 Press User Documentation Download Page 15

Page: 15 / 375

Note:

Refer to the

System Administrator Guide

for more information on the Administrator

features.

Language

Note:

The number of languages available on your system depends on what was installed

during the initial installation process.

Selecting a particular language immediately changes the language on the User Interface. No
confirmation is required.

Changing the Language

1. Press the

Language

button on the User Interface.

The

Language

window displays on the touch screen.

2. Choose one of the following:

• Select the desired language from the list, then select

Save

. The language on the screen

changes to the new language and closes the

Language

window.

• Select the

Cancel

button to return to the main screen.

PPrreessss PPeerrffoorrm

maannccee C

Cuussttoom

miizzaattiioonn

There are three different performance customization configurations available with the press:

• Xerox

Versant

280 Press with basic print engine configuration performance

• Xerox

Versant

280 Press with All Stock Rated Speed (ASRS) configuration performance

(optional)

• Xerox

Versant

280 Press with Performance Package (PP) configuration performance (optional)

PPrreessss w

wiitthh B

Baassiicc PPrriinntt EEnnggiinnee C

Coonnffiigguurraattiioonn PPeerrffoorrm

maannccee

The press is a full color or black and white, automatic 2-sided copier and printer that operates at a
speed of 80 prints per minute when printing on 8.5 x 11 in. or A4 paper. The press uses CMYK to
create full color.

Summary of Contents for Versant 280 Press
























































































































































































































































































































































































Search results

Summary of Contents for Versant 280 Press

Reviews:

Related manuals for Versant 280 Press

Brands by name

Popular brands

Xerox Versant 280 Press, User Documentation

Search results

Summary of Contents for Versant 280 Press

Reviews:

Related manuals for Versant 280 Press

Brands by name

Popular brands