Xerox Versant 280 Press User Documentation Download Page 132

Page: 132 / 375

BR Finisher with Booklet Maker

Item

Specification

Tray Capacity

•

Offset (Top) Tray

: 500 sheets of 8.5 x 11 in., A4 unstapled

•

Stacking or Stapling Tray

–

1500 sheets of 8.5 x 11 in., A4, 11 x 17 in., A3, SRA3 unstapled

–

200 stapled sets of 8.5 x 11 in., A4 (single-position stapling, or dual or 4-
position stapling)

–

100 stapled sets of 11 x 17 in., A3, SRA3

Sizes

• Stacking: A6–SRA3, 4 x 6–12 x 19 in.
• Stapling: B5–A3, 7.25 x 10.5–11 x 17 in.

Paper Weight

52–400 g/m

uncoated and coated paper, for Top Tray and Stack Tray

Stapling

Single and multi-position stapling
• Auto stapling, 50 sheets maximum, 90 g/m

, 24 lb.

• Letter, Legal, Tabloid, A3, A4, B4, and B5 sizes supported

Hole Punch

North America

: 2–3 Hole Punch

Europe

: 2–4 Hole Punch; 4 Hole Swedish Punch (Optional)

Booklet Maker

• Saddle stitch 2–16 sheets (7 sheets at 106–176 g/m

uncoated, or 5 sheets at

177–220 g/m

coated)

• Bi-fold up to 5 sheets
• Letter, Legal, Tabloid, A3, A4, 12 x 18 in., SRA3 supported

IInntteerrffaaccee D

Deeccuurrlleerr M

Moodduullee aanndd IInntteerrffaaccee D

Deeccuurrlleerr M

Moodduullee w

wiitthh

IInnlliinnee SSppeeccttrroopphhoottoom

meetteerr ((IILLSS))

The Interface Decurler Modules (IDM) are optional finishing devices that are used in conjunction with
other optional finishing devices.

Two Interface Decurler Modules are available with the Xerox

Versant

280 Press:

• Interface Decurler Module (IDM)

• Interface Decurler Module (IDM) with Inline Spectrophotometer (ILS)

The Interface Decurler Modules provide the following functions:

132

Summary of Contents for Versant 280 Press
























































































































































































































































































































































































Search results

Summary of Contents for Versant 280 Press

Reviews:

Related manuals for Versant 280 Press

Brands by name

Popular brands

Xerox Versant 280 Press, User Documentation

Search results

Summary of Contents for Versant 280 Press

Reviews:

Related manuals for Versant 280 Press

Brands by name

Popular brands