Xerox Versant 280 Press User Documentation Download Page 69

Page: 69 / 375

Reply To

Use this option to enter a reply recipient email address.

Read Receipts

This option requests an email with the delivery status from the recipient to the sender.

File Format

Select the desired file format for scanned data; options include:

•

PDF

: Saves scanned data in PDF format.

•

PDF/A

: Saves scanned data in the PDF/A format. PDF/A is used primarily for archiving and

long-term preservation.

•

TIFF

: Saves scanned data in TIFF format.

•

JPEG

: Saves scanned data in JPEG format. This option is selectable when Color or Grayscale is

selected for Color Scanning.

•

TIFF/JPEG Auto Select

: Automatically selects JPEG or TIFF. The file format is determined for

each page:

JPEG

for full-color and grayscale pages and

TIFF

for monochrome pages.

•

XPS

(XML Paper Specification): Saves multiple pages into a single file.

Note:

Options may vary and some options may not be available for your press.

Additional File Format options

Depending on the selected file format, the following sub-options also are available:

•

Compression Method

: Allows you to select a compression method for the scanned data.

•

MRC High Compression

: Allows you to save PDF and XPS files with high compression.

•

Searchable Text

: Allows you to select whether to perform character recognition in PDF files.

•

PDF Security

: Allows you to configure security for the PDF output in order to prevent

unauthorized access.

•

Optimize For Quick Web View

: Optimizes the PDF file so that it is displayed faster on a web

browser.

•

Add Thumbnail

: Allows you to attach thumbnails to XPS files when XPS is selected. A

thumbnail is a reduced, small file size image that helps you check the file contents.

•

Single File for Each Page

: Saves each page as a single file in the specified format.

Compression Method options

When

Manual Select

is chosen for the

Compression Method

, some or all of the following options

are available.

For black and white images and pages only, select one of the following options:

•

Modified Modified Read

(MMR): This setting is automatically selected when

Photo and Text

Text

is chosen for

Original Type

•

Modified Huffman

(MH): This setting is automatically selected when

Photo

is chosen for

Original Type

•

JBIG2 Arithmetic Encoded

: This process has better compression performance than the

Huffman encoded process. However, the compression rate is slower than Huffman encoded
and it uses more memory but yields better compression results.

Summary of Contents for Versant 280 Press
























































































































































































































































































































































































Search results

Summary of Contents for Versant 280 Press

Reviews:

Related manuals for Versant 280 Press

Brands by name

Popular brands

Xerox Versant 280 Press, User Documentation

Search results

Summary of Contents for Versant 280 Press

Reviews:

Related manuals for Versant 280 Press

Brands by name

Popular brands