manualshive.com logo in svg

Xerox Versant 280 Press, User Documentation

The Xerox Versant 280 Press is an innovative printing solution that delivers exceptional quality and performance. To help you get started quickly, you can easily access the Quick Start Manual for free download on our website. Explore the full potential of this remarkable product by obtaining the manual at manualshive.com.

Share
Download
background image

Note:

The ACQS suite is available only with the external Xerox

®

EX 280 Print Server Powered by

Fiery

®

; it is not available with the Xerox

®

EX-i 280 Print Server Powered by Fiery

®

.

ACQS takes the variability out of the color equation by incorporating standardized color
measurements. The standardized color measurements use the Inline Spectrophotometer on the
Interface Decurler Module. The Inline Spectrophotometer calibrates color on the press and generates
accurate destination profiles for different stocks.

Procedures are automated in that they eliminate the need for an operator to scan target sheets
manually using an external spectrophotometer. The operator initiates the procedure at the print
server, but all target sheets are generated and scanned automatically, and all measurements,
calculations, and corrections are performed automatically.

Inline Spectrophotometer (ILS)

The Inline Spectrophotometer (ILS) is housed in the Interface Decurler Module. The ILS enables the
Automated Color Quality Suite (ACQS). ACQS automates the process of ensuring stable and accurate
color from job to job. This automation eliminates the need for operators to use a hand-held
spectrophotometer during print server calibration. It also facilitates the creation of custom
destination profiles for each stock on which the press prints.

With the ILS placed strategically within the paper path, automated processes are quick to perform
and require less downtime for the press. Automated processes include measurements for calibration
and destination profiling. Over time, the ACQS software and the ILS hardware work together to
provide accurate and more stable color.

In addition to the Inline Spectrophotometer (ILS), the Interface Decurler Module provides cooling for
the press when the press is running at higher speeds. Also, the Interface Decurler Module provides a
decurler to ensure flat sheets for finishing.

Configuration Information Regarding the Performance Package

1. The Performance Package must be ordered when the press is ordered. Once the press has been

configured without the Performance Package option, it cannot be upgraded later to include the
package.

2. The Performance Package is not available with the Xerox EX-i 280 Print Server. Customers are

required to order the external Xerox EX 280 Print Server.

3. If customers configure the press with the Business Ready (BR) Finisher, the Business Ready

Finisher with Booklet Maker, or the Offset Catch Tray, the Performance Package option is not
available for the configuration.

4. The Performance Package requires the Interface Decurler Module with ILS.

5. Finishing options that are enabled when the Interface Decurler Module with ILS is installed

include these finishers and their options:

• Inserter device

• GBC

®

AdvancedPunch

®

Pro

• High Capacity Stacker (HCS)

• Crease and Two-Sided Trimmer

• C/Z Folder

• Production Ready (PR) Finisher

17

Summary of Contents for Versant 280 Press
























































































































































































































































































































































































Reviews:

No comments

Related manuals for Versant 280 Press

Xerox WorkCentre Pro 40 Specification preview
WorkCentre Pro 40
Brand: Xerox Pages: 14
Magicard Tango 2e Brochure preview
Tango 2e
Brand: Magicard Pages: 2
Magicard Tango 2e Quick Start Manual preview
Tango 2e
Brand: Magicard Pages: 2
IDStation fastID User Manual preview
fastID
Brand: IDStation Pages: 18
Olympus U-5RES-ESD Instructions Manual preview
U-5RES-ESD
Brand: Olympus Pages: 16
Oki C9200dxn User Manual preview
C9200dxn
Brand: Oki Pages: 2
Graphic Products DuraLabel 4 User Manual preview
DuraLabel 4
Brand: Graphic Products Pages: 28
Shandong New Beiyang Information Technology Co. BTP-L540 User Manual preview
BTP-L540
Brand: Shandong New Beiyang Information Technology Co. Pages: 47
Custom Audio Electronics KPM 216 H User Manual preview
KPM 216 H
Brand: Custom Audio Electronics Pages: 88
IDVille ID MAKER Zenius User Manual preview
ID MAKER Zenius
Brand: IDVille Pages: 66
Lexmark E120n Quick Start Manual preview
E120n
Brand: Lexmark Pages: 2
Wasp WPL4M Series User Manual preview
WPL4M Series
Brand: Wasp Pages: 73
Oki C6150dn Manual De L'Utilisateur preview
C6150dn
Brand: Oki Pages: 309
Canon TS7400 Series Getting Started preview
TS7400 Series
Brand: Canon Pages: 76
Oki ML3310e Setup Manual preview
ML3310e
Brand: Oki Pages: 23
WOOSIM WSP-BT200 Operator'S Manual preview
WSP-BT200
Brand: WOOSIM Pages: 17
Ricoh Aficio GX7000 Setup And Print Manual preview
Aficio GX7000
Brand: Ricoh Pages: 5
MUTOH RJ-900 Technical Bulletin preview
RJ-900
Brand: MUTOH Pages: 16

Brands by name

Popular brands

Load more brands