98-
Appendix
Replacing components
Replacing the retard pad
To replace the retard pad for the ADF, do the following:
1. Open the Cover A (ADF cover). You will find the retard pad as shown below.
2. Lift the lower edge of the retard pad and push down the upper left edge. Then
gently slide the retard pad downwards to remove it from the slot.
3. Make sure the retard pad is inserted in the correct direction. The rubber pad
should be facing up and the thinner edge be on the left.
Cover A
Retard pad (Front side)
(Rear side)
㽳
㽲
Thinner edge
Rubber pad