19 - Getting started
3. To open the cover, release the
screws, and then pull the cover
out of the printer.
4. Hold the additional memory so
that the notch is aligned with the
protrusion on the slot, and insert
the additional memory into the
slot firmly.
5. Reattach the cover to the printer.
6. Slowly flip down cover B to its
original position.
Note:
Insert the additional memory firmly
by pushing it from the top.
Connecting cables
This section covers the connection of
the USB cable, LAN cable, and
phone cable.
USB cable
Connect the USB cable to your PC or
notebook to be used for printing and
scanning operation.
1. Connect the USB cable to the
USB connector at the back of the
printer.
2. Connect the other end of the
USB cable to the USB port on
your computer.
Notes:
•
Both the USB port and the LAN
connector supports hot plug, you
don’t have to switch the power off
before connecting the cables.
•
Connect a USB cable only after
the software driver has been
installed on the computer.
1
2
