57 - Advanced functions
Host settings
You can specify Host settings for
Ethernet
,
TCP/IP
,
Protocol
, or
IP
Filter
under the host settings sub-
menu.
To specify the network setting
through ethernet connection, do the
following:
1. Press the
<Menu>
button on the
control panel. Use the
<
S
/
T
>
buttons to select
[Configuration
Need Password]
and press
<Set>
.
2. Use the
<
W
/
X
>
buttons to select
[Network Config -
Network]
and press
<Set>
.
3. Use the
<
W
/
X
>
buttons to select
[Network Config -
Ethernet]
and press
<Set>
.
4. Use the
<
W
/
X
>
buttons to select
[Auto select]
,
[10Base Half]
,
[10Base Full]
,
[100Base Half]
,
or
[100Base Full]
.
5. Press
<Set>
to confirm.
To specify the TCP/IP setting, do the
following:
1. Press the
<Menu>
button on the
control panel. Use the
<
S
/
T
>
buttons to select
[Configuration
Need Password]
and press
<Set>
.
2. Use the
<
W
/
X
>
buttons to select
[Network Config -
Network]
and press
<Set>
.
3. Use the
<
W
/
X
>
buttons to select
[Network Config -
TCP/IP]
and
press
<Set>
.
4. Use the
<
W
/
X
>
buttons to select
[IP Address]
,
[Subnet Mask]
,
or
[Gateway address]
.
5. Press
<Set>
to confirm.
To specify the protocol setting, do
the following:
1. Press the
<Menu>
button on the
control panel. Use the
<
S
/
T
>
buttons to select
[Configuration
Need Password]
and press
<Set>
.
2. Use the
<
W
/
X
>
buttons to select
[Network Config -
Network]
and press
<Set>
.
3. Use the
<
W
/
X
>
buttons to select
[Network Config -
Protocol]
and press
<Set>
.
4. Use the
<
W
/
X
>
buttons to select
[LPD]
or
[Port 9100]
and press
<Set>
.
5. Use the
<
W
/
X
>
buttons to turn
the option ON/OFF.
6. Press
<Set>
to confirm.
