Paper handling
- 66
Setting paper sizes and
types
You can set the paper size and type
that is loaded in the paper tray on the
control panel when the [Bypass
Mode] on the [Tray Settings] menu is
set to [Panel Specified] on the control
panel.
In this case, the printing is done only
when the paper size and type set-
tings on the control panel are the
same as on the print driver.]
Also, using the [Display Popup], you
can specify whether or not to display
the screen to set the paper size and
type every time you load paper into
each tray on the control panel. The
default settings do not display the
message for the paper tray and do
display the message for the paper
trays (optional).
Note:
The [Display Popup] setting for the
paper tray is available only when
[Paper Mode] is set to [Panel Speci-
fied].
Removing printouts or
copies
The optional output extension output
tray is designed to prevent paper
from falling from the printer after the
print job is complete.
Before printing a document, pull out
the extension output tray.
If the extension output tray is still not
long enough for the paper you are
loading, pull the extension output tray
further. Completed copies and prints
can be taken from the extension out-
put tray.
2
1
