Scanning
- 36
Saving scanned images
After you scanned an image, you can
choose to save the image in a spe-
cific file type.
To save the scanned image, do the
following:
1. Select
[Save As]
from the
[File]
menu.
2. Choose a folder to save the file.
3. Type a file name and select a file
format. You can save the images
as: BITMAP, EPS, JPEG, TIF,
PED, PICT, PNG, etc.
4. Click
[Save]
.
Previewing and adjusting
the scan area
Once you have configured the basic
settings for scanning, you can pre-
view the image and select or adjust
the area of the image you want to
scan. The preview image will be dis-
played in a separate preview window
on your computer screen.
To preview and adjust the scan
image, do the following:
1. Click the
[Preview]
icon in the
Docuworks application window.
2. To select a scan area, click the
auto locate icon to place a mar-
quee that marks the edges of your
image area. You can change the
scan area by moving the mar-
quees.
<<
images to be inserted here
>>
3. When you finished adjusting the
scan area, click
<Scan>
to start
scanning.
Image filter
You can scan your images at their
original size, or reduce or enlarge
them as required.
Note:
If you are going to scan your image
to a particular size, such as 6 x 8
inches, select the
Target Size
after
previewing it, but do so before
adjusting the scan area. This sets
the scan area to the correct propor-
tions so your image will not be
cropped.
To set the target image size, do the
following:
1. Open
[DocuPrint C2090 FS]
and click
[ToolBox].
2. Select
[Application]
. (Graphic
needed)
3. Select
[Image quality]
, the qual-
ity is shown by ‘dpi’. Select from
75dpi to 600 dpi.
4. Press
[Scan]
to start.
Operation on DocuPrint
C2090 FS:
1. In Scan mode, press the
<Image
Quality>
button on the control
panel. Use the
<
S
/
T
>
buttons
to select
[Scan Resolution]
function.
2. Choose from 150dpi, 300dpi,
600dpi, or 1200dpi, and press
<Set>
.
3. Press the
<
S
>
button when
ready.
