iv
-
Preface
For Power and Earth Connection
Place the machine on a level and sturdy surface that can
withstand the weight of the machine. If tilted, the machine
may fall and cause injuries.
When moving the machine, be sure to unplug the power cord
from the outlet. If the machine is moved with the power cord
connected, it can cause damage to the cord which could
result in fire or electric shock.
The machine weights 33.0 kg (without consumables and with
controller). When moving the machine, make sure that there
are three or more persons handling it to avoid dropping it and
causing injuries.
When moving the machine, one person facing the front of the
machine (control panel) and the other facing the back, should
firmly grip the recessed areas on the bottom of the both sides
of the machine. Lifting the machine by gripping any other
areas can cause the machine to fall and result in injuries.
Use only the power cord specified for this machine. Using a
different power cord may cause fire or electric shock. Also, do
not use the machine’s power cord with other equipment.
The power specifications are listed as follows.
The specifications that apply to your machine depend on your
machine configuration. Connect the power plug only to an
appropriate power outlet. Otherwise, it can cause fire or elec-
tric shock. If in doubt, contact our Customer Support Center
or your dealers for more information.
•
Rated voltage 100/120V (+/-10%)
Rated frequency 50/60Hz (+/-3HZ)
•
Rated voltage 220/240V (+/-10%)
Rated frequency 50/60Hz (+/-3HZ)
Ensure that the plug connection is free of dust. In a damp
environment, a contaminated connector can draw a signifi-
cant amount of current that can generate heat and eventually
cause fire over an extended period of time.
Always use the power cord provided with your machine.
When an extension power cord is required, always use a
properly rated cord. If you use a cord with an unspecified cur-
rent rating, the machine or plug may emit smoke or become
hot to the touch externally.
WARNING
