Getting started - 16
Installing the toner
cartridges
Warning:
Never throw a toner cartridge into
an open flame. It can cause an
explosion and burn injuries.
1. After confirming the [
Load XXXX
(the color of the toner) Car-
tridge
] message on the control
panel, open the front cover.
2. Hold the tape and gently pull it
forward to remove the protective
cover from the toner cartridge.
3. Take the toner cartridge out of
the box, and gently shake it
several times as shown in the
diagram to distribute the toner
evenly.
4. Remove the top part of the seal
from the toner cartridge and pull
the seal in the direction of the
arrow, keeping it parallel with the
toner cartridge.
5. Insert the toner cartridge with the
arrow facing you. Push the
cartridge all the way into the slot.
Push both sides evenly until it is
secure.
6. Push down the right lever to lock
the toner cartridge.
7. Close the front cover. The toner
cartridge carrier rotates to the
next empty slot.
8. Repeat steps 1 through 7 until all
cartridges are installed.
