13 - Getting started
Connecting power
Power cable
You can load the paper or install the
toner cartridge and drum cartridge
into the printer after the printer is
switched on.
Important:
The power cable does not support
hot plug. Make sure the power
switch is in off position before con-
necting the power cable to the
printer.
1. Connect the power cord to the
power cord connector at the back
of the printer.
2. Connect the other end of the
power cord to the power outlet.
3. Press the power switch of the
printer to the
<|>
position. The
toner cartridge carrier rotates
and then stops. The [
Load XXXX
(the color of the toner) Car-
tridge
] message is displayed on
the control panel.
Note:
Before removing the power cord
from the machine, make sure the
power is switched off properly.
2
1
