manualshive.com logo in svg

Xerox Document Centre 505 Series, User Manual

Share
Download
Xerox Document Centre 505 Series User Manual Download Page 83

67

4.3 Configuring the Printer Drivers

Installing/Configuring 

the 
Printer 

Drivers

4

Delete Overlay

To delete an overlay, select it in the "Overlay" list box, and click 

Delete Overlay

. Click

Yes 

to confirm deletion and 

No 

to abort the action.

Delete All

Deletes all overlays from any or all of the destinations.

Query Page Overlay

When this check box is selected, a message box requesting for confirmation will appear
whenever a page overlay command is sent to the printer. If this is not selected, the selected
page overlay file will be sent directly to the printer.

This option is not active if 

No Overlay

 is selected.

Selected Overlay status

Displays information on the selected overlay.

Overlay Creation status

Displays information regarding the creation of overlays.

Summary of Contents for Document Centre 505 Series














































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands