Xerox Document Centre 505 Series, User Manual

Page: 61 / 269

45
Installing/Configuring
the
Printer
Drivers
"
This section describes the procedure for installing and uninstalling the printer drivers.
Two methods of installation are described here, one for a local printer and the other for a network printer.
If you have installed an earlier version of the printer driver, uninstall it first by following the procedure in
4.2.3 before installing the new version.
You can also use the Add Printer Wizard to install the printer driver. Refer to ReadMe for more details.
4.2.1 For a local DC 706/705/606/605/506/505 series printer
Local printer refers to a printer that is directly connected to your computer.
Procedure
Start Windows 95, Windows 98, Windows Me, Windows NT 4.0 or Windows 2000.
In this example, we will install the PCL 6 driver on the Windows 98 OS.
Click Start and select Run .
The "Run" dialog box appears.
Insert in the "PCL Driver/Network Utility (Windows
®
)" CD-ROM and enter
"E:\English\DC706\Win9x_Me\PCL6\Setup\Setup.exe" on the Run dialog box.
Then click OK .
In this example, we assume that drive E is the CD-ROM drive. Enter the
appropriate letter for your CD-ROM drive.
The "End User Licence Agreement" dialog box appears.
Read through the licence agreement carefully. If you have no objections to it, click
on the checkbox for "I accept the terms of the above Licence Agreement" and then
click Next .
4.2 Installing/Uninstalling the
Printer Drivers