Xerox Document Centre 505 Series, User Manual

Page: 106 / 269

90
#
5.5 Uninstalling
This section describes the procedure for deleting Direct Print Utility from Windows 95, Windows 98,
Windows Me.
To delete Direct Print Utility from the system, carry out the following steps:
Delete all the relevant printer ports: FX TCP/IP DPU Port.
Delete all the related files: Fuji Xerox DPU Port.
Restart the system.
Procedure
Start Windows 95, Windows 98 or Windows Me.
Double-click the "My Computer" icon and the "Printers" icon.
Open the "Properties" dialog box of a printer that uses the relevant printer port
(e.g.FX TCP/IP DPU Port). Click the "Details" tab and change the port setting
from the printer port used to another one like LPT1.
Save the new setting by clicking "Apply".
Repeat Step for all other printers that use this printer port.
In any of the "Properties" dialog box of the printers, click Delete Port .
A "Delete Port" dialog box appears. Select all the entries of the relevant printer port
(e.g. FX TCP/IP DPU Port) and click OK . Make sure all the entries for the Direct
Print Utility Port have been deleted before proceeding to the next step.
Click Start and select Settings , followed by Control Panel .
Double-click the "Add/Remove Programs" icon.