Xerox Document Centre 505 Series, User Manual

Page: 127 / 269

111
Setting
Up
for
Windows
Network
%
7.4 Changing Printer and
Workgroup Name
If necessary, you will need to change the SMB printer and workgroup names. However, you cannot
change these names using the printer control panel. Instead, change them from CentreWare Internet
Services or Windows host computer. This section describes the procedure to change these names from
the Windows host computer.
Refer to "Chapter 10 Using CentreWare Internet Services" for details on operating CentreWare Internet
Services.
7.4.1 Through Windows Network
You can change the SMB setting by accessing the file in the printer via the Windows
network from the host computer, and then changing the information there. However, only
the administrator is allowed to do this.
The procedure below explains how to overwrite the setting file (config.txt) at the first
instance. Subsequently, you will need to know the following items that have been set: SMB
Host Name, Workgroup, Administrator Name, and Administrator Password.
The factory setting of Administrator Name and Password of config.txt is both
"admin".
Procedure
Open Network Neighborhood from the Windows client computer, followed by
Workgroup (factory setting: Workgroup) and then the printer.
The factory setting of the host name of the printer is "FX-xxxxxx" (where
xxxxxx is the last three bytes of the Ethernet address of the printer). You can
confirm the name by referring to Host Name of SMB on the Printer Settings
List.
Double-click the admintool folder.
The following dialog box will be displayed.
• For Windows 95/Windows 98/Windows Me
• For Windows NT 4.0/Windows 2000