Xerox Document Centre 505 Series, User Manual

Page: 37 / 269

Overview of the Printer
21
Select ON and then touch Save .
Select Close to return to the screen of Step 4.
Select Exit Tools .
The machine will be rebooted.
1.7.2 Other setting items
If necessary, define the settings for the following items related to LPD. However, there is
no need to change the factory setting of these items for normal usage.
• LPD Print Mode (Factory setting: PCL*)
• LPD PJL Switch (Factory setting: On)
• LPD TBCP Filter (Factory setting: Enable)
• LPD Connection Time-Out (Factory setting: 16 sec)
• LPD Spool (Factory setting: Hard Disk spool)
Refer to "Chapter 13 Configuring by the Tools Mode Screen". These items can also
be set using CentreWare Internet Services. Refer to "Chapter 10 Using CentreWare
Internet Services" for information on CentreWare Internet Services.
• * If the optional PostScript software kit is installed, factory setting will be Auto.
• With LPD, you can store the print data output from the application in the spool file
of the printer temporarily to be processed for printing. Set the spool mode by using
the LPD spool of the receive buffer capacity.
Spool mode:
The mode which stores print data output from the application in the spool file of
the printer temporarily to be processed for printing. You can choose to save the
spool file in either the RAM disk which has used the printer memory or the hard
disk connected to the printer. As the processing of print data after spooling will be
done in the printer, the application in the client is soon released. Requests from
multiple clients can be processed at the same time.
Non spool mode:
The mode which processes printing while the print data output from the
application is being received by the printer. When the printer is processing
printing request from a client, printing request from other clients cannot be
received.
1.7 Setting Port