Xerox Document Centre 505 Series, User Manual

Page: 139 / 269

123
Setting
Up
for
NetWare
&
8.1 Using NetWare
8.1.3 Interface
The printer supports the following types of Ethernet interface:
• 10Base-T (Twisted Pair Cable)
• 100Base-TX (Twisted Pair Cable)
The following frame types are supported:
• Ethernet II specification
• IEEE802.3 specification
• IEEE802.3/802.2 specification
• IEEE802.3/802.2/SNAP specification
The printer will send out packets of each frame type on the connected network and
activate automatically by the frame type which responded first.
However, if other protocols are running simultaneously on the same network, use the
frame type that the NetWare server is using.
Some network components (such as the hub) may not support automatic setup for
frame type. If the data link indicator light of the port which is connected to the printer
of the network component does not light up, match the setting (IPX/SPX setting) of the
frame type of the printer to the frame type of the file server.