Xerox Document Centre 505 Series, User Manual

Page: 48 / 269

!
32
3.1 Flow of Printing
Activate application software used in the host
computer
Specify printing from application software
End
If necessary
If necessary
If necessary
Operate menu
Stop printing
Output
3.1.4 For DOS
The basic flow of printing from the DOS environment is as follows:
(This may differ according to the host device and system configuration used.)
Refer to the manual of the application regarding its operation.
Before sending print data from the client computer, check the following:
(1) Port status in Tools Mode>Printer/Scan Mode Settings>Port Settings
(the enabled port is highlighted)
(2) Print mode of the port in Port Settings>(selected port)>Print Mode
"Chapter 13 Configuring by the Tools Mode Screen"
(3) Way of printing (e.g. scale) by the emulation mode menu in use
"Chapter 11 Setting Print Mode"
Refer to the manual of the application regarding its operation.
"3.3 Cancelling Printing From Printer"
"3.4 Forced Outputting"