XCMG XCT80, Operation Manual

Page: 11 / 250

XCT80 Truck Crane Operation Manual
IX
Preface
Cordially thanks to the trust and recognition of XCMG brands, and the use of the truck crane
produced by XCMG heavy machinery Co., Ltd.
The operating service manual is applicable to XCT80 truck crane.
The operation service manual describes the operation, inspection and adjustment methods for XCT80
truck cranes (crane for short), and the installation and transportation methods for the crane attachments.
The hoisting operation is a dangerous work. Therefore, in order to ensure the use safety and at the same
time play the best performance of the crane, please carefully read this manual before operation, master
and use the contents in the manual, and operate in strict accordance with the requirements of the manual.
The operator should pay special attention to the contents labeled "danger", "warning", "caution" and
"check" in the manual.
Before leaving the factory, the crane should be tested rigorously, and all control elements should pass
rigorous adjustment and calibration. Tor your safety, please do not arbitrarily adjust by yourself.
Only trained personnel obtaining a quali
fi
cation certi
fi
cate and passing an examination
can operate the crane.
Please pay special attention to regularly inspect the crane safety devices, which should not be used
when any failure or abnormality exists. You must comply with the highest criteria:
safety first.
The operating manual and other vehicle technical documents are part of the crane. Please preserve
properly them within the life period of the product. This manual serves as the necessary basis for your
operation and use of the crane. Our company will not be responsible for any adverse consequences due to
operation not complying with this manual. For safe lifting in special circumstances, please contact with
our company. We will provide you with a timely and effective technical support.
Our products have passed the national "3C" certification. To ensure "3C" product
conformance requirements in the maintenance process, parts with the same manufacturer, same model
and the original product con
fi
guration must be used when the user replaces the main supporting parts.
Otherwise, our company will not assume the resulting loss.
Our company reserves the right to modify the contents of the "operating manual" due to technological
improvements. The products are subject to changes without notice, and we hope you understand. In this manual
some figures may be inconsistent with the practical products, but do not affect your use. The real product
represents the state.
Version 1 in November, 2012
Preface
Courtesy of CraneMarket.com