XCMG XCT80, Operation Manual

Page: 86 / 250

XCT80 Truck Crane Operation Manual
6-6
The liquid crystal display region
The liquid crystal display region division:
Figure 6-5 Liquid crystal display region
Display contents for each region
1)Region 1 shows the current alarm signs, such as: after the instruments are powered on, when the
body gas line pressure is low, it will display low air pressure alarm, and if the conditions are met, the
XCMG trademarks will be displayed in region 1.
2)Region 2 displays the following contents: the voltage information, the accelerator opening
degree, the engine torque, engine running time, and fuel economy. It is noteworthy that when the
instrument is in the CAN mode and non-CAN mode, the contents displayed in the region II are
different.
3)Region 3 displays the current voltage information or urea level information.
4)Region 4 displays the information of the current gear when the vehicle is equipped with the
automatic gearbox.
5)Region 5 displays the accumulated vehicle mileage and single mileage information.
Instrument operation instructions
1)Pressure switch display
After instruments are powered on, the barometer shows pressure value of a gas line (5 in Figure
6-4), and when pressing the adjustment button I (6 in Figure 6-4), the barometer displays the pressure
value of another gas line.
2)Instrument brightness adjustment
Press adjustment button I (6 in Figure 6-4) and adjustment button II (8 in Figure 6-4) for over 3s,
the instruments enter into the setup mode, as shown in Figure 6-7, the customers can design instrument
background lighting settings, and set the Chinese and English display, but cannot change the parameter
settings.
The components and functions of lower crane portion
Chapter 6
Region 1
Region 2
Example
Region 3
Region 5
Region
4
Courtesy of CraneMarket.com