XCMG XCT80, Operation Manual

Page: 194 / 250

XCT80 Truck Crane Operation Manual
10-18 Crane operation
Chapter 10
Figure10-14 Foot plate position schematic
10-4-3 Fold and unfold foot plate
10-4-4 Fold and unfold horizontal outrigger
10-4-5 Fold and unfold vertical outrigger
Before extending out outrigger, the foot plate should be pulled out from the driving state (A
in Figure10-14 ). Firstly, pull out the locating pin (B in Figure10-14), pull the foot plate out (C in
Figure10-14 ), and then insert the
fi
xed pin been pulled out into the inside pin hole (D in Figure10-14)
and the outrigger can be just extended. When the crane is driving, the foot plate should be stored, and
the storage method is opposite to the pull out method.
The horizontal outrigger and swing outrigger are unilaterally operated, that is, the left outrigger
control box can only control the stretching and retraction of the left front swing outrigger and the
left rear horizontal outrigger, and the right outrigger control box can only control the stretching and
retraction of the right front swing outrigger and the right rear horizontal outrigger.
Separately press or simultaneously press the four outrigger vertical oil cylinder control switches to
control stretching of the four vertical outrigger.
A B
D
C
Traveling state
Lifting operation state
Fixed value
Courtesy of CraneMarket.com