XCMG XCT80, Operation Manual

Page: 94 / 250

XCT80 Truck Crane Operation Manual
6-14
Figure 6-13 Combination switch
When using this switch down a long slope, you should pay attention to:
1
、
The engine should not be shut down, and the clutch should not be in separation state,
otherwise it will cause the exhaust brake system failure;
2
、
Reasonably select stalls, the engine speed shall not be more than 2100 rpm.
The components and functions of lower crane portion
Chapter 6
Overtaking (upper)
Automatic reset
A direction
A direction
A direction
B direction
Low beam (middle)
High beam (lower)
Headlight
Small lamp
Headlight and small lamp stalls
(sequence for each turning 30°: OFF, Small lamp)
Wiper stalls (sequence for each turning 30°:
OFF, intermittent, low-speed, high-speed)
Right turning(R)
Right turning(L)
Neutral position(N)
PUSH/press—Spray
(automatic return)
Courtesy of CraneMarket.com