XCMG XCT80, Operation Manual

Page: 100 / 250

XCT80 Truck Crane Operation Manual
6-20 The components and functions of lower crane portion
6-3-3 Other device
1. Lock
Screw the key 90
°
in clockwise and
rebound, the door lock is locked;
Screw the key 90
°
in counterclockwise
and rebound, the door lock is unlocked.
Figure 6-15 Lock
Chapter 6
A small DC motor is installed in the
rearview mirror, when the rearview mirror
needs to adjust slightly, in accordance with the
direction shown by arrow on the button, the
rearview mirror can be driven by the motor
to convert the angle and direction, until to the
appropriate position.
24.Engine diagnostic switch (15 in Figure
6-10 in sequence) and engine diagnostic
indicator light (27 in Figure 6-7)
When the engine diagnostic indicator light
is on during vehicle operation, press this switch,
If the "TEST" indicator light is
fl
ashing evenly,
indicating the engine is working properly. If
light is not uniformly flashing, indicating the
engine failure. Determine the fault code and
judge engine failure type according to the
number of flashes indicator light "TEST" and
referring to the product diesel engine manual.
25. Charge indicator light (2 in Figure
6-7)
When the start switch is in ON position,
this light is on, indicating the power is turned
on, you can start the engine. After the engine is
working properly, the light goes off, indicating
the generator starts to work. If this light does not
go off, you can increase the throttle to the middle
engine speed, if the light is still on, indicating the
generator does not work, you should stop to check.
26. Brake indicator light (4 in Figure 6-7)
When the foot brake pedal is stepped on,
the brake indicator light goes on.
27.Reversing indicator light (8 in Figure
6-7)
When the shift lever is in the reverse position,
the reverse indicator light goes on.
Courtesy of CraneMarket.com