XCMG XCT80, Operation Manual

Page: 111 / 250

XCT80 Truck Crane Operation Manual
7-7
Figure 7-4 Coolant tank
4. Check engine oil
Check lower crane portion engine oil level
every day before starting work, and the vehicle
should be placed horizontally in check.
a. Start the engine, observe the lower crane portion
engine oil pressure warning lights, if the alarm lights do
not go out after 10 seconds, turn off the engine and
fi
nd
out the reasons.
b. The engine idles for about 2-3 minutes.
c. Turn off the engine.
d. Check the oil level after 2 minutes.
Engine oil dipstick is located in the left side
of the vehicle in front of the main boom. The
oil level should be between the min and max
position. If necessary, add oil, and for engine
oil specifications you can refer to the
“
Engine
Manual
”
.
Lower crane portion engine oil refueling
nozzle is located next to the dipstick in the left rear
of the cab. (see Figure 7-5)
Unscrew (Do not open it!) the lid of hole
1 at the operating temperature lower limit to
release pressure. Open the lid. The coolant
level should at least reach the minimum
position. If the oil level is too low, add coolant
in accordance with the
“
Engine Manual
”
.
Finally, tighten the lid of the coolant.
Traveling Status on Highway
Chapter 7
Courtesy of CraneMarket.com