Xante FilmMaker 4, User Manual

Page: 90 / 310

2-54 Macintosh Setup bb
1. Go to the printer home page (fig. 2.112). See “Printer Home Page” earlier in
this chapter for details.
Fig. 2.112 Printer Home Page Fig. 2.113 Default Fuser Temperature Window
2. Select Printer Configuration: Print Quality: Fuser Temperature (fig. 2.112). The
Default Fuser Temperature window appears (fig. 2.113).
3. Select the type of media for which you want to set the temperature from the
Media Type drop-down menu (fig. 2.113). Then, Click Change.
4. Select the desired temperature for the media selected in step 3 from the Fuser
Temperature drop-down menu (fig. 2.113). Options are 0-none to 15-hot.
Select 0-none or 1 when printing to Myriad film, envelopes, and paper. Select
hotter settings for heavy paper, and heavy film. Then, click Change.
5. Close the browser.
You also can set the fuser temperature through the printer’s front panel. See “Fuser
Temperature” in chapter 4 for details.
NEIT (Negative Enhanced Imaging Technology)
NEIT is a laser power setting that is used for negative prints. Choosing a lower setting
increases laser power and causes the output to be darker. Choosing a higher setting
decreases laser power and cause the output to be lighter. The NEIT feature allows you
to change your default NEIT settings for each media type. See “Negative Enhanced
Imaging Technology (NEIT)” in chapter 4 for more details.
This NEIT feature can be used only if you are printing a negative to Matte Film.