Xante FilmMaker 4, User Manual

Page: 114 / 310

3-2 PC Setup
RJ-45
Connector
Ethernet Port
Fig. 3.2 Connect to the Ethernet Port
Before using your printer, set it up for your network environment and configure the
Ethernet interface using the appropriate procedures later in this chapter.
USB Connection (for PC Only)
To connect to the USB (Universal Serial Bus) port
Connector
To Host Computer Connector
To Printer
Fig. 3.3 USB Cable
1. Plug the USB cable’s square, smaller connector into the printer’s USB port (fig.
3.3).
2. Plug the thin, larger connector into the computer’s USB port.
It is not necessary to turn off your printer or your computer before plugging in the
USB.
Installing Adobe PostScript Printer Drivers
If you did a custom install during setup and did not install the printer drivers and
support files, you must install the Adobe PostScript driver and your printer’s PPD
before using your printer.