Xante FilmMaker 4, User Manual

Page: 76 / 310

2-40 Macintosh Setup bb
To configure EtherTalk settings
1. Go to the printer home page (fig. 2.87). See “Printer Home Page” earlier in this
chapter for details.
Fig. 2.87 Printer Home Page Fig. 2.88 EtherTalk Configuration Window
2. Select Printer Configuration: Network: EtherTalk (fig. 2.87). The EtherTalk
Configuration window appears (fig. 2.88).
3. Enter the desired name for the printer (fig. 2.88); for example, you might name
the printer Samson. Then, click Change to the right.
4. Enter the new name for the EtherTalk Zone Name (fig. 2.88). Then, click
Change to the right.
EtherTalk zone names are limited to 32 characters, are not case sensitive, and cannot
include the = (equal),
≅
(approximately equal), * (asterisk), : (colon), or @ (at)
characters.
5. Close your browser.
General Network Configuration
General configuration options allow you to set the network buffers.
1. Go to the printer home page (fig. 2.89). See “Printer Home Page” earlier in this
chapter for details.