Xante FilmMaker 4, User Manual

Page: 259 / 310

Troubleshooting 8-1
Chapter 8 - Troubleshooting
Introduction
This chapter describes the status messages that can direct you to the source of a
problem, suggests solutions for some typical printer setup and print quality problems,
and provides information about preventing and clearing media jams.
Status Messages
Printer front panel window messages provide printer status information and can help
you determine the source of a problem or media jam.
EARLY PAPER JAM
A media jam has occurred along the paper path caused by
media reaching a position earlier than expected.
E:FIFO
The FIFO SIMM or SODIMM is not present, is not
properly inserted, or is broken.
E:FIXING ROLLER
There is a hardware problem with the fuser.
E:FUSER
There is an error with the fuser, such as a temperature
inaccuracy.
E:LASER
There is a hardware problem with the laser.
E:MOTOR
There is a hardware problem with the motor.
EXIT PAPER JAM
A media jam has occurred after the media has been printed
but before it has been deposited in the output tray.
FilmMaker 4
Appears when the printer is first turned on, before the
initialization process begins.
FRONT COVER OPEN
The multipurpose feeder cover is open.
FRONT PAPER JAM
A media jam has occurred caused by the media not being
pulled from the tray properly.
FULL STACK
The output tray is full.
FUSER COVER OPEN
The fuser cover is not closed properly.