Xante FilmMaker 4, User Manual

Page: 258 / 310

7-14 Options
Reinstalling the Controller Board Panel
1. Insert the tab on the top of the controller board panel into the slot above the
opening (fig. 7.6).
2. Align tabs on the front of the controller board panel with the slots in the front
of the opening; then slide the panel forward into place (fig. 7.6).
3. Secure the controller board panel to the printer by tightening the screws on the
back of the panel (fig. 7.5).
4. Reconnect all interface cables and reconnect the power cable to the printer and
the AC power supply.
Resolution Upgrades
The 2400 dpi resolution upgrade must be done at the factory.
◊◊◊