manualshive.com logo in svg

Xante FilmMaker 4, User Manual

Share
Download
Xante FilmMaker 4 User Manual Download Page 115

PC Setup 3-3

Deleting Previous Driver Versions

Normally, you do not have to delete previous Adobe PostScript printer drivers or any
previously installed Adobe PostScript printers. However, if you suspect installation
problems, first remove your installed printers from the Printers dialog box in the
Windows Control Panel and reinstall them via the Adobe PostScript Printers dialog
box which is also in the Windows Control Panel.

If after removing and reinstalling your printers, you still experience problems, delete
all previous driver versions and reinstall your printers using the Adobe PostScript
Printers dialog box.

To delete a previous driver version

1.

Select Start: Settings: Control Panel. Then, double-click Add/Remove
Programs.

2.

Select XANTÉ ScreenWriter 4 Utilities in the scroll box on the Install/Uninstall
tab in the Add/Remove Program Properties Window (fig. 3.4).

Fig. 3.4  Add/Remove Program Properties Window

3.

Click Add/Remove.

4.

Click Yes in the warning window to proceed with removal. Then, click OK.

5.

Scroll through and verify that your printer’s XANTÉ Utilities were removed
from the scroll box on the Install/Uninstall tab. Then, click OK.

Summary of Contents for FilmMaker 4























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands