Xante FilmMaker 4, User Manual

Page: 249 / 310

Options 7-5
Figure 7.7 shows upgrade installation locations.
Fig. 7.7 Controller Board
Installing Optional Memory
Standard RAM configuration for your printer is 64 MB. You can upgrade printer
memory to 128 MB or 256 MB.
You can only install one SODIMM upgrade on the controller board. This means that
if you upgrade to 128 MB and later decided to upgrade to 256 MB, you have to
replace the 128 MB SODIMM with the 256 SODIMM.
If you purchase RAM from a vendor other than XANTÉ, XANTÉ cannot guarantee
the performance of that RAM. XANTÉ tests show some vendor’s RAM, manufactured
to specifications, is incompatible with our printers.
Static electricity can destroy the printer’s electronic components. Always use an
antistatic procedure when working with the controller board. Use an anti-static
wristband or touch an unpainted metal surface to eliminate static electricity before
handling a circuit board. When handling a board, always hold it by the edges and
avoid walking around, particularly on carpeted surfaces.