Xante FilmMaker 4, User Manual

Page: 195 / 310

PC Setup 3-83
8. Click Update Printer.
When you click Update Printer, a window displays the Printer Calibrated message.
Click OK to continue and all the numbers clear automatically from the boxes in the
Enter Calibration Values section.
Do not enter the values again. Also, if you click Reset
Printer, you can reset all settings or the selected media type.
9. Repeat steps 5 through 8 until the measurements in the corresponding boxes
are within .5 mm of each other.
Your application printer properties must match your calibration settings. For
example, if you chose User-defined 1 as your media type in the More X-ACT
calibration window for 11" x 17" (tabloid) paper, you must choose User-defined 1 as
your Media Weight in your application printer properties when printing on 11" x 17"
paper.
10. Click Close. The More X-ACT window closes.
Managing Fonts
To download fonts to your printer or to remove specific fonts, see the documentation
for your font downloader program.
To remove all downloaded fonts from printer memory, turn the printer off and then
back on. To remove all fonts downloaded to a hard disk, reinitialize the disk by
downloading the Initdsk.ps file.
◊◊◊