Xante FilmMaker 4, User Manual

Page: 88 / 310

2-52 Macintosh Setup bb
VM (Virtual Memory)
The VM option allows you to adjust the size of your PostScript virtual memory in
Megabytes. This setting controls the printer’s default virtual memory setting at power
up.
1. Go to the printer home page (fig. 2.108). See “Printer Home Page” earlier in
this chapter for details.
Fig. 2.108 Printer Home Page Fig. 2.109 VM Window
2. Select Printer Configuration: PostScript: VM (fig. 2.108). The VM window
appears (fig. 2.109).
3. Select the desired amount of memory to set aside for virtual memory at power
up (fig. 2.109); the minimum value allowed is 9 MB, 12 MB is the factory
default setting, and the maximum value is 40% of installed RAM. Then, click
Change.
4. Close your browser.
Print Quality (EP1, Fuser Temperature, NEIT, and Print Density)
Print Quality has EP1, Fuser Temperature, NEIT, and Print Density options.
EP1 (Electrophotography, Toner Control)
EP1 allows you to control the level of toner transferred from the toner drum to the
media to control toning.