Xante FilmMaker 4, User Manual

Page: 184 / 310

3-72 PC Setup
If you have a password: When figure 2.161 appears, enter your password in the
Current Password field and then continue to step 3.
3. Type in a password of your choice (up to 8 characters in length) in the New
Password field (fig. 2.160 or fig. 2.161); then, reenter that new password in the
Re-enter Password field.
4. Click submit. you now can access the secure webpage areas. When you are
through, select Printer Security: Logout (fig. 2.160). The Logout window
appears (fig. 2.158).
5. Click Submit. Then, close the browser.
This new password will be required every time you log on to your printer’s web page.
Change/Reset the Password
If you wish to change your password or have forgotten it, you can reset it by using the
following sequence from the Printer Security section (fig. 2.160).
LOGIN: LOGOUT: LOGIN: HOME: LOGIN: SET PASSWORD
Simply go these pages in this order to reset your password. Then, follow the steps on
how to set the password from the previous section.
Utility Pages
The Utility Pages option allows you to print the following four utility pages:
Start Page — prints a page with basic printer information such as the printer’s current
name, resolution, page count, amount of installed RAM, number of resident fonts,
EtherTalk and LPR status, and the Ethernet and IP addresses.
Low Toner Page — prints a toner reorder form which you can fill out and return to
XANTÉ or your XANTÉ vendor.
Network Page — prints a page listing current network EtherTalk, IP, IPP, LPR, and
Ethernet physical settings.
Font List Page — prints a list of the Adobe PostScript 3 fonts resident on your
XANTÉ PostScript 3 printer.
Font Sample Page — prints samples of Adobe PostScript 3 fonts resident on your
XANTÉ PostScript 3 printer.
Menu Layout — prints a page listing the front panel menus and their current settings.