Troubleshooting 8-7
Toner on the printed media smears when rubbed.
•
Media may be damp or otherwise damaged. Make sure media
meets the requirements in “Media Specifications” in chapter 5.
If necessary, replace the media. See “Standard Cassette” and
“Multipurpose Feeder” in chapter 1.
•
The fuser may not be working properly. The printer displays
the E: FUSER status message if there is a hardware problem
with the fuser.
Instead of my image (or text), the output is a blank page.
•
The sealing tape may not be pulled out of the toner cartridge.
Remove the cartridge and pull out the tape. See “Toner
Cartridge” in chapter 1.
•
The printer may feed two or more sheets of media at a time.
Reduce the size of the media stack. See “Standard Cassette”
and “Multipurpose Feeder” in chapter 1.
•
The density setting may need adjusting. See “Adjusting Print
Density” in chapter 4.
•
The toner cartridge may need replacing. See “Toner Cartridge”
in chapter 1.
Instead of my image (or text), the output is a solid black page.
•
The density setting may need adjusting. See “Adjusting Print
Density” in chapter 4.
•
The toner cartridge may need replacing. See “Toner Cartridge”
in chapter 1.
Summary of Contents for FilmMaker 4
