Xante FilmMaker 4, User Manual

Page: 266 / 310

8-8 Troubleshooting bb ______________________________________________________
Blank areas appear in my image (or text).
• Media may be damp or otherwise damaged. Make sure the
media meets the requirements in “Media Specifications” in
chapter 5. If necessary, replace the media. See “Standard
Cassette” and “Multipurpose Feeder” in chapter 1.
• The sealing tape may not be pulled completely out of the toner
cartridge. Remove the cartridge and pull out the tape. See
“Toner Cartridge” in chapter 1.
Media comes out of the printer creased or crumpled.
• Media may be damp or otherwise damaged. Make sure the
media meets the requirements in “Media Specifications” in
chapter 5. If necessary, replace the media. See “Standard
Cassette” and “Multipurpose Feeder” in chapter 1.
• Media may be loaded improperly. Make sure it is loaded print
side up.
Print is smudged or small spaces are plugged.
• Media may be damp or otherwise damaged. Make sure the
media meets the requirements in “Media Specifications” in
chapter 5. If necessary, replace the media. See “Standard
Cassette” and “Multipurpose Feeder” in chapter 1.
• The toner cartridge may need replacing. See “Toner Cartridge”
in chapter 1.
Vertical blanks appear on my image (or text).
• The toner cartridge may not be installed properly. Reinstall it.
See “Toner Cartridge” in chapter 1.
• The toner cartridge may need replacing. See “Toner Cartridge”
in chapter 1.