3-58 PC Setup
Fig. 3.118 Printer Home Page
Fig. 3.119 EP1 Window
2.
Select Printer Configuration: Print Quality: EP1 (fig. 3.118). The EP1 window
appears (fig. 3.119).
3.
Select the desired media type for the input source (fig. 3.119). Options for the
media type are Paper, Heavy Paper, Cover, Transparency, Labels, and UserDef
(User Defined) 1 through 5; Paper is the factory default. Then, click Change.
4.
Select the desired level of toner control. Options are 0 through 15. The default
setting depends on the selected media. The default setting for paper and film is
10; the default setting for plate is 0. Then, click Change.
5.
Close your browser.
Fuser Temperature
The Fuser Temperature option allows you to adjust the printer’s fuser temperature for
the type of media used.
1.
Go to the printer home page (fig. 3.120). See “Printer Home Page” earlier in
this chapter for details.
Fig. 3.120 Printer Home Page
Fig. 3.121 Fuser Temperature Window
Summary of Contents for FilmMaker 4
