PC Setup 3-57
VM (Virtual Memory)
The VM option allows you to adjust the size of your PostScript virtual memory in
Megabytes. This setting controls the printer’s default virtual memory setting at power
up.
1.
Go to the printer home page (fig. 3.116). See “Printer Home Page” earlier in
this chapter for details.
Fig. 3.116 Printer Home Page
Fig. 3.117 VM Window
2.
Select Printer Configuration: PostScript: VM (fig. 3.116). The VM window
appears (fig. 3.117).
3.
Select the desired amount of memory to set aside for virtual memory at power
up (fig. 3.117); the minimum value allowed is 9 MB, 12 MB is the factory
default setting, and the maximum value is 40% of installed RAM. Then, click
Change.
4.
Close your browser.
Print Quality (EP1, Fuser Temperature, NEIT, and Print Density)
The Print Quality option allow you to select toner level and fuser temperature.
EP1 (Electrophotography 1)
The EP1 option allows you to reduce toning by controlling the level of toner
transferred from the toner drum to the media.
1.
Go to the printer home page (fig. 3.118). See “Printer Home Page” earlier in
this chapter for details.
Summary of Contents for FilmMaker 4
