Xante FilmMaker 4, User Manual

Page: 3 / 310

iii
All other brand and product names are trademarks, registered trademarks, or service marks of
their respective holders.
Manual Notice
XANTÉ CORPORATION reserves the right to make changes to this manual and to the
equipment described herein without notice. Every effort has been made to ensure that this
manual is free of inaccuracies and omissions. However, XANTÉ CORPORATION makes no
warranty of any kind including, but not limited to, any implied warranties of merchantability
and fitness for a particular purpose with regard to this manual.
XANTÉ CORPORATION assumes no responsibility for, or liability for, errors contained in this
manual or for incidental, special, or consequential damages arising out of the furnishing of this
manual, or the use of this manual in operating the equipment, or in connection with the
performance of the equipment when so operated.
Proprietary
The digitally encoded software included with the XANTÉ FilmMaker 4 printer is copyrighted ©
1998-2003 by XANTÉ CORPORATION. All Rights Reserved. Patent Pending. This software
may not be reproduced, modified, displayed, transferred, or copied in any form or manner or
on any media, without the express written permission of XANTÉ CORPORATION.
Copyright
This manual is Copyrighted © 1998-2003 by XANTÉ CORPORATION. All Rights Reserved.
Printed in the USA. This manual may not be copied in whole or in part, nor transferred to any
other media or language without the express written permission of XANTÉ CORPORATION.
Safety Information
The printer generates a small amount of ozone gas during image transfer in the printing process.
When shipped from the factory, the printer meets the Underwriter’s Laboratory (UL) standard
for ozone emission.
An invisible laser beam which radiates inside the laser printer’s scanner unit can
cause permanent eye damage. DO NOT disassemble or try to adjust the laser
scanner unit.
FCC Classification
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.